How to Fix Shower Head Leak
If your Delta shower head is leaking, don't worry - you can fix it with ease! This guide will walk you through the steps necessary to repair your leaky shower head. Keep in mind that some repairs may require more experience than others, so if you're not comfortable performing the repair yourself, be sure to consult a professional. Thanks for reading!
What Causes Delta Shower Heads to Leak?
There are a few different reasons why your Delta shower head may be leaking.
- The O-rings may be worn or damaged: Over time, the O-rings that seal your shower head to the pipe can become worn or damaged. This can cause water to leak from around the connection.
- The washers may be worn or damaged: Washers are located under the shower head and help to create a tight seal. If these washers are worn or damaged, water can leak through.
- The shower head itself may be cracked: If it is cracked, water will obviously leak out!
- Improper installation: If your Delta shower head was not installed properly, it may not be sealed correctly and could cause leaks.
How to Fix a Leaking Delta Shower Head
Now that you know some of the common causes of leaks, let's take a look at how to fix them.
Replacing the O-Rings
This is a relatively simple repair that anyone can do. Simply remove the shower head and unscrew the retaining ring. This will expose the O-rings. Take a close look at the O-rings and check for any damage. If they are damaged, simply replace them with new ones. Screw the retaining ring back on and reattach the shower head.
Replacing the Washers
If the washers are worn or damaged, they will need to be replaced. This is a slightly more difficult repair, but can still be done by most people. First, remove the shower head and unscrew the retaining ring. This will expose the washers. Remove the old washers and replace them with new ones. Screw the retaining ring back on and reattach the shower head.
Replacing the Shower Head
If the shower head is cracked, it will need to be replaced. This is a relatively simple repair - just remove the old shower head and screw on a new one.
Maintenance Could Prevent Future Leaks
To help prevent future leaks, it's important to perform regular maintenance on your Delta shower head.
- Cleaning the shower head regularly: Over time, mineral deposits can build up on your shower head, which can eventually lead to blockage or leaks. To prevent this, clean your shower head regularly with vinegar or a commercial cleaning product.
- Inspecting the O-rings and washers regularly: Take a close look at the O-rings and washers every few months to make sure they're in good condition. If they show signs of wear, replace them immediately.
- Hiring a professional: If you're not comfortable performing the repairs yourself, be sure to hire a professional to do it for you. This will ensure that the job is done correctly and that your shower head remains leak-free.
DIY vs. Professional Repair
Although some of the repairs mentioned above are relatively simple, others are more difficult and should be done by a professional.
When deciding whether to do the repair yourself or hire a professional, there are a few things to keep in mind:
- Cost: Professional repairs can be expensive. If you're on a tight budget, doing the repair yourself may be the best option.
- However, keep in mind that if you don't do the repair correctly, it could end up costing you more in the long run.
- Time: Professional repairs can take a long time, especially if you have to wait for someone to come to your house. If you're short on time, doing the repair yourself may be the best option.
- Skill level: Some of the repairs mentioned above are more difficult than others. If you're not confident in your ability to do the repair correctly, it's best to hire a professional.
- Warranty: If your Delta shower head is still under warranty, you may want to contact the manufacturer before performing any repairs. Some warranties require that repairs be done by a professional in order to remain valid.
- Safety: Some of the repairs mentioned above involve working with tools and chemicals. If you're not comfortable doing these types of repairs, it's best to hire a professional.